NEW - 50 Ton Beam Grab |
|
You have come to rely on Caldwell standard products to fit your lifting needs, but did you know we have a fully staffed application and engineering department available to custom design lifting solutions on demand. Our heavy-duty beam grab has special features designed to allow for efficient handling of wide beam sections and bridge girders. Custom designed for your application, our hooks assure proper contact to the beam flange or girder. Our lifters are designed to conform with stringent ASME B30.20 and BTH-1 standards. Our standard line of Model F beam grabs consists of 4 sizes - 5, 15, 25 and 35-ton capacities, but if that doesn't fit your needs, we can design and build a lifter that will.
|
|
|
|
QUICKSHIP Four-Point Spreader System |
|
Need a custom four-point spreader beam for your material handling applications? Caldwell has the solution – our standard model 34 spreader beams are now available!Get a custom spreader beam without the “custom” lead-time.Our new Model 34 spreader beams are available to ship in 7 – 10 days.Capacities of 6 or 9 tons with fully customized spreads up to 12’ square; this system is the quick solution to those challenging applications. Chain top rigging is standard with many bottom rigging options available.Conforms to ASME B30.20 and BTH-1 standards.
|
|
|
|
Extended Sizes - Adjustable Spreader Beams |
|
Caldwell standard model 32 spreader beams are now available in capacities up to 40 tons! Due to demand for larger standard sizes, we have increased our offering to include 12 new sizes. Our offering now ranges from 2 to 40 tons with spreads up to 20’. Telescoping adjustment on 12-inch increments gives you the flexibility you need to handle a wide range of loads. Top rigging is available in either chain or wire rope. Custom sizes are available. Conforms to ASME B30.20 and BTH-1 standards.
|
|
|
|
60 Ton Sheet Lifter |
|
Caldwell’s new model 60M Motorized Heavy Duty Sheet Lifter easily handles bundles, sheets, plates and other materials stacked horizontally. The 60M features low headroom design for optimum lifting capabilities. The standard 460-volt motorized leg adjustment provides efficient one-person operation. Other standard features include rack and pinion leg drive with a self-locking worm. Optional features include end chains with plate hooks, extended grab shoe lengths, and longer legs to increase load clearance. All Caldwell Sheet Lifters are designed and manufactured to ASME standards.
|
|
|
|
High Capacity Lifting Beams - Model 20 HC |
|
In response to recent demand for Model 20 Lifting Beams with capacities larger than we chart as standard, we have created a group of 9 standard high-capacity Model 20 HC lifting beams to help fill the demand for these units while improving delivery times. Delivery time have improved from 9 weeks after receipt of order to 3 weeks after receipt of order. These beams come standard with three spreads, lifting shackles, build in stands, and pin bail.
|
|
|
|
Expanded Tong Offering! |
|
NEW MODELS
In response to the many requests we receive for different lifting tongs and grabs, Caldwell is pleased to offer a group of new lifters for concrete. These five new models have capacity ranges from 330 to 2200 pounds. Cam or Polyurethane pad lifters with several different grip ranges are available.
|
|
|
|
WOOD LIFTERS! |
|
NEW PRODUCT
In response to the many requests we receive for lifting clamps capable of handling different materials, Caldwell is pleased to offer a group of new lifters for wood beams and panels.These six new models have capacity ranges from 220 to 575 pounds.There are five pressure style clamps with one supporting style grab.
|
|
|
|
UPENDING VACUUM LIFTER |
|
The new Univac® Economy Vacuum Lifter is a faster and easier way to lift and maipulate sheet, plate or glass. The easy to use powered tilt will help increase your overall productivity.
|
|
|
|
Clamps, Grabs, & Tongs Brochure |
|
If you need a clamp, grab or tong - Caldwell has your solution.
Our complete line has lifters that will handle concrete, wood, steel, pipe, bales, dies, and more. If you don't find what you need in our standard product offering - our application engineers can custom design an lifter to work for you.
|
|
|
|
Adjustable Load Lifters - Model 90ACL |
|
Caldwell’s New Adjustable Load lifter works for a wide range of loads including pallets, panels, bundles, and much more. The adjustability of the lifter is what makes it so versatile.
The Lifting Bail can be adjusted to the correct center of gravity you need, and then it will automatically return home to allow the lifter to stay level when you move to the next lift. The Throat Opening can be adjusted to fit the load allowing you to easily clear any obstacles and you can adjust the forks as needed to fit your specific load.
|
|
|
|
Adjustable Four Point Lifting Beam |
|
The Model 27SD is a standardized adjustable four point lifting beam. There are three different sizes available. The 3 ton unit has a main beam spread of 80” with a cross arm spread of 60”. The 5 ton unit has a main beam spread of 120” with a cross arm spread of 96”. The 10 ton unit has a main beam spread of 144” with cross arm spread of 96”. Each unit has different adjustment points along each spread to fit a wide range of applications.
Contact our inside sales staff for details today!
|
|
|
|
Rig-Release™ Adder Options |
|
The success of our Rig-Release™ Remote Releasing Hook has led us to many new applications. Users of the Rig-Release™ have come to us with specific needs that helped us develop the following additional options.
Option 1 - Upward Pull
For applications when the hook is below the operator and an upward pull of the rope lanyard is required. This option makes Caldwell’s Rig-Release™ an even more versatile tool. Available only on manual release units.
Option 2 - Protective Coating
The Rig-Release™ hook is coated with a protective coating of zinc dichromate. This option is available on all models and capacities.
Option 3 - Low Profile, Direct Connect
The Low Profile, Direct Connect option allows the Rig-Release™ to be attached closer to the load then our standard model. With this option the Rig-Release™ can be directly attached to the load* without the use of a sling because the strip sling hook and lug have been removed. The Low Profile, Direct Connect Option is available on all models and capacities.
*refer to dimensional drawings for clearance
Multiple options can be added to the Rig-Release™. Options 1 & 2 are shown on the same model in the top right image.
Please contact us directly for more detailed information on any of our new options. Toll Free: 800-628-4263
|
|
|
|
Precision Lifting Boom |
|
Quickly turn your fork lift into a "Portable Crane". Caldwell's new Precision Lifting Boom combines the reach of a fork lift boom with the precise lifting of a hoist, adding value and functionality to your lift truck. Easily reach in and pick up those hard to get loads with this versatile and cost effective alternative to an overhead crane.
|
|
|
|
Univac 250 Power-Pac |
|
The economical Univac® 250 Power Pac is a simplified design that keeps the overall unit weight and cost to a minimum while still providing you with the high quality Caldwell design you have come to expect. The slide valve vacuum lever is easy to operate and is located on the handle within easy reach of the operator. The vacuum gauge is easy to read and an optional low vacuum indicator can provide an audible warning to the operator.
 Click here to see the brochure
|
|
|
|
Modular Spreader Beam |
|
Raising Portability to New Heights
The New Modular Spreader Beam is adjustable and durable - yet lightweight, providing maximum flexiblity along with quick andy easy assembly.
Caldwell's new Modular Spreader Beam is configurable to various spreads from 10-22' with capcities of 1 or 2 tons. The light-weight rigging options make this unit easy to transport. Models are IN-STOCK and ready to ship!
|
|
|
|
Paper Roll Handling Beam - Available as QUICKSHIP |
|
Standard Sizes Available to ship in 10 days!
 The new Model 23QS has 30 standard sizes available in capacities from 1/2 to 5 tons. With the beam components on the shelf and ready to be assembled, and the "J" hooks custom cut per order, we can quickly get a customized paper roll handling beam shipped in 10 days or less.
|
|
|
|
Pipe Pick™ |
|
The patented new concrete Pipe Pick™ is a quicker, safer and cleaner way of handling precast concrete pipe.
Simple and fast
• No need to reach inside the pipe
• Worker remains above the pipe at all times
• Conforms to applicable standards so you are in compliance with OSHA
Simply insert the Pipe Pick™ into the lifting hole in the pipe—tilt—to engage the beveled edge—and lift up! You can now lift and set the pipe. Once the pipe is set, lower the Pipe Pick™; the counterweighted lift arm automatically falls straight and the Pipe Pick™ can be removed from the pipe.
|
|
|
|
What's New
