Lifting Heavy Equipment


×

  • Model 23

    Used to lift rolls with plate style or bent J-Hooks. Hooks are designed to support the core mandrel which is through the I.D of the roll. Fixed beam lengths can be used for single roll widths. Maximum roll diameters will determine length of J-Hooks.

  • Model 23QS

    Sometimes the simple designs are the best. This product has been part of the Caldwell assortment for a long time ... and for good reason. It works. You tell us how to cut the J-hooks and choose fixed or pivot. They're fast to set, easy to train, and help material handlers on the shop floor get the job done.

  • Model 50

    Put the power and control in the crane operator's skilled, capable hands with the Caldwell Motorized Rotating Crane Hook. With full 360-degree rotation, the operator can place loads in tough to reach or access locations with ease, orienting them exactly right.

  • Model 50 - PB

    Motorized Rotating Crane Hook Pin Ball

  • Model 74P

    Used to grip the O.D. of a roll. The diameter range can vary up to 25%. Used to grip the O.D. of a roll. The diameter range can vary up to 25%. A double-leg design will provide additional roll stability. However, single-leg models are available for narrower rolls. Double-leg tongs recommended for rolls wider than 48".

  • Model 75P

    Used for side lifting of rolls by gripping on the ends.

  • Model 80H

    It's all about the pivoting wedge on this unit. By maneuvering that wedge in between two stacked coils, an operator can separate them and begin a tilt, allowing the rest of the hook to slide in and do its job.

  • Model 81P

    This Caldwell Model 81P Roll Lifter is designed to handle rolls by inserting a round arm into the roll I.D.

  • Model 82

    With capacities from 5 to 50 tons, this C-hook is built to perform. A mill favorite, the standard design shows up and does the work every day. Need customizations like padding for coil protection, other capacities, or something else? Call 800.628.4263 to talk about your application.

  • Model 82LA

    Efficiency matters. And when you can move more than one slit coil at a time, crane operators save time and, therefore, money. Set them up for success with Caldwell's Model 82LA.

  • Model 82NC

    Available in capacities from 1/2 ton to 5 tons. Choose a narrow hook to handle narrow coils with less coil edge damage than web slings. Unit will not hang level when empty.

  • Model 82RC

    When space is tight and the loads are heavy, this is the hook for the job. Based off Caldwell's best-selling Model 82, the Model 82RC features a recessed counterweight that allows you to stack coils closer together, making the most of the space you have available.

  • Model 83E

    Ergonomic Vertical Eye Coil Lifter

  • Model 83EW

    Vertical coil lifting presents unique challenges, but the Caldwell Model 83EW is ready to conquer. Simply insert the unit in the I.D. of the coil {stored on spacers, of course), placing the feet under the coil itself. The lifter legs automatically adjust to the walls of the coil I.D. so a safe lift can proceed.

  • Model 83HW

    Simple hand wheel operation adjusts legs to the appropriate I.D. for engagement and disengagement. Stock units available with capacities of 2-1/2 to 10 tons. Need something bigger or smaller? Call 800.628.4263 to talk to our Customer Service team to discuss options.

  • Model 84

    Choose Hand Wheel Leg Drive or Motorized Leg Drive.

  • Model 85

    If there was a Caldwell Lifting Solutions Hall of Fame, the Model 85 Coil Lifter could claim “Legend” status. The rugged and efficient stock units sold here are ready to handle up to 33 tons, but that’s just the beginning. The Model 85 is also one of our most customized lifters. Higher capacities, rotation, load scales, indicator lights, padding, toe rollers, and more are available. See the following pages for details.

  • Model 85P

    Used to lift rolls by positioning lifting pins in the I.D. of the roll.

  • Model 85R

    What happens when you take a legendary lifter and add rotation? A star is born! Caldwell's Model 85R is an industry favorite, in use in manufacturing facilities all over the world. And if you work in paper mills, steel mills or other severe-duty environments, our Mill Duty line, built for extreme temperatures, higher capacities, and higher load cycles, is ready to do the work. Call for info.

  • Model 86

    New and improved design makes this versatile lifter a great option for coil lifts where aisle space is tight. Plus, it's much more adjustable to provide simple, affordable, efficient lifts for a variety of coil sizes.

  • Model 88

    Low-Platform Roll Upender/Downender allows rolls to be repositioned by 90° rotation. The low-platform is desirable in those applications where headroom is restricted. Hydraulic controls are standard.

  • Model 88L

    Make life a little easier for operators with this low-platform design. With the Model 88L, they have better access to coils.

  • Model 88RP

    Heavy duty Model 88 Roll Positioner is available with a mechanical drive. This model requires additional platform height.

  • Model 90P

    Model 90P Pallet Type Roll Lifter lifts and trnsports a roll by supporting it underneath its diameter, leaving the core open.

  • Model PS-CH

    Model PS-CH is used to store all C-Hook type lifters (Models: 82, 82LA, 82RC).

  • Model PS-M-TS

    Model PS-M-TS is for storage and maintenance of two-sided lifters. Personnel platforms provide ease of access to drive system for maintenance and inspection of motorized units.

  • Model PS-TS

    Model PS-TS is for storage of two-sided coil lifters (Models: 84, 85, 86).