Beam Lifting Clamps


×

  • Model A-1

    The Model A-1 is a portable beam clamp that provides easy suspension of hoists, from channels or angles thereby eliminating the need for nuts, bolts, shackles and so on. The Model A-1 is designed for use on channel or angle shapes only. This model is furnished with a fluted tool steel locking wedge which holds the clamp in place on channels or angles.

  • Model AC

    These clamps may be used for Drifting Loads when used in pairs or multiples. The Models AC and ACP are light weight, portable clamps that provide quick, easy attachment to structural members for the use of chain falls, hoists and wire rope pullers. These clamps are of single unit construction with a quick acting hand screw to secure the clamp. The Model AC has a fixed Shackle Eye. These clamps are especially useful in the construction and maintenance for shipbuilding and other industries.

  • Model ACP

    These clamps may be used for Drifting Loads when used in pairs or multiples. The Models AC and ACP are light weight, portable clamps that provide quick easy attachment to structural members for the use of chain falls, hoists and wire rope pullers. These clamps are of single unit construction with a quick acting hand screw to secure the clamp. The Model ACP has a Pivoting Shackle Eye. These clamps are especially useful in construction and maintenance for shipbuilding and other industries.

  • Model B-1

    The Model B-1 is a portable beam clamp that provides easy suspension of hoists from beams or girders thereby eliminating the need for nuts, bolts, shackles and so on. The Model B-1 is intended for use on the American standard or wide flange beams. This model is furnished with a fluted tool steel locking wedge which holds the clamp in place on a beam. The Model B-1 can be used for lifting as well.

  • Model B-2

    The Model B-2 is a beam trolley clamp that provides connection of a hoist or chain fall to an overhead beam and enables it to be moved along the beam as the necessity arises. Equipped with four heavy duty rollers, the Model B-2, with load attached, can be moved along any length of American Standard or wide flange beams. The fluted tool steel locking wedge permits the clamp to be temporarily or permanently locked at a particular position along the beam.

  • Model BC

    The Model BC is a multi-purpose beam clamp suitable for both lifting beams or providing suspension of hoists from beams or girders, thereby eliminating the need for nuts, bolts and shackles. It is intended for use on the American standard or wide-flange beams.

  • Model PB

    The Model PB is similar to the Model B-1 and provides quick attachment to beams and girders and may be used in the general rigging of chain falls and hoists. The clamp hinges in two sections allowing quick installation. This model is furnished with a fluted tool steel locking wedge which holds the clamp in place on a beam. The two eyes allow the clamp to be attached in the vertical or horizontal positions. The clamp is of single unit construction and fits a wide range of flange widths.