Roll Lifters/Positioners


×

  • Model 23

    Used to lift rolls with plate style or bent J-Hooks. Hooks are designed to support the core mandrel which is through the I.D of the roll. Fixed beam lengths can be used for single roll widths. Maximum roll diameters will determine length of J-Hooks.

  • Model 23QS

    Sometimes the simple designs are the best. This product has been part of the Caldwell assortment for a long time ... and for good reason. It works. You tell us how to cut the J-hooks and choose fixed or pivot. They're fast to set, easy to train, and help material handlers on the shop floor get the job done.

  • Model 74P

    Used to grip the O.D. of a roll. The diameter range can vary up to 25%. Used to grip the O.D. of a roll. The diameter range can vary up to 25%. A double-leg design will provide additional roll stability. However, single-leg models are available for narrower rolls. Double-leg tongs recommended for rolls wider than 48".

  • Model 75P

    Used for side lifting of rolls by gripping on the ends.

  • Model 81P

    This Caldwell Model 81P Roll Lifter is designed to handle rolls by inserting a round arm into the roll I.D.

  • Model 85P

    Used to lift rolls by positioning lifting pins in the I.D. of the roll.

  • Model 88RP

    Heavy duty Model 88 Roll Positioner is available with a mechanical drive. This model requires additional platform height.

  • Model 90P

    Model 90P Pallet Type Roll Lifter lifts and trnsports a roll by supporting it underneath its diameter, leaving the core open.