Caldwell® Lifters for Marine Manufacturing & Maintenance


×

  • Model 16

    Model 16 Adjustable Spreader/Lifting Beam provides versatility and power. This best-selling workhorse gives crane operators and riggers options with adjustable lifting points for dozens of load scenarios.

  • Model 17

    Model 17 Adjustable Lifting beam features an adjustable bail and lifting points in 6" incerments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions.

  • Model 18

    The fixed Twin Basket Sling Lifting Beam should perhaps be called El Toro for its resemblance to a longhorn bull! Just as tough and ready to roll, this unique beam comes standard with two sets of bent bar hooks on all units with a spread of 6'L or greater, if you need a different configuration, let us know – it’s customizable.

  • Model 19

    Elegantly simple design with a bent bar bail makes hooking and unhooking easy ... which is appreciated when the day is long and the picks are plentiful.

  • Model 20H

    Higher capacities? Greater outside spreads? Both? When you need a more powerful beam to do the work, the Model 20H is ready for the job. Standard units handle up to 40 tons with outside spreads up to 42'L If you need something larger, Caldwell can help. Mill Duty line of Low-Headroom Multiple-Spead Lifting Beams handles loads up to 375 tons!

  • Model 20HC

    Big loads? Heavy picks? Super-size lifts? No worries. The model 20HC is ready and willing to do the work. With built-in beam stands and reinforced I-beam construction, this beauty is ready for whatever you throw at it.

  • Model 20TB

    Bell Style Triangle Lifting Beam

  • Model 20TS

    Shackle Style Triangle Lifting Beam

  • Model 21

    A specially designed lifting and rotating beam using two cranes or two hoists to horizontally rotate a load. A position locking pin holds the load rotation at a desgnated position. Available with motorized rotation.

  • Model 22

    Heavy-Duty Twin Basket Sling Lifting Beams

  • Model 24

    Off-center loads are easier than ever with the Model 24 Adjustable Bail Lifting Beam. Simply slide the bail along the channel and lock it into preset positions. Simple concept. Fantastic results.

  • Model 25

    When you hook this Model 25 Twin Hoist Lifting Beam up to a hoist at each end, you have created a custom lifting device of sorts. By using the hoists in tandem, you increase load stability, which improves load safety.

  • Model 26

    Like the Model 24, the Model 26 Load Leveler Lifting Beam gives you the ability to slide the bail to handle off-center loads. But with this design, you can place the bail literally anywhere ... no preset slots to lock into. So you have complete. control.

  • Model 26P

    Center of gravity should be evaluated, unbalanced loads can create unstable rigging; consult qualified rigger or factory

  • Model 27F

    Choose from three design options to build a custom 4-point beam for your specific application: Mulitiple Bails, Adjustable Bail, or Adjustable Spread.

  • Model 27SD

    Handle large loads using multiple pick points. Choose from 3-, 5-, or 10-ton capacities with adjustable spreads. For customizations, choose the Model 27F.

  • Model 27SL

    When your facility uses bulk containers with four nylon loops, the Model 27SL helps protect the load, operator, and container.

  • Model 27T

    With help from Caldwell engineers, design a 3-point, low-headroom lifting beam to your exact specifications.

  • Model 28

    Chlorine Cylinder Lifting Beam

  • Model 30

    Not all picks require low-headroom beams. And sometimes you need the extra stability of a chain or wire rope rigging. In those situations, the Model 30 Fixed Spreader Beam is the right choice.

  • Model 30HC

    Capacity and spread configurations are virtually limitless. The chart highlights sizes available from 50 to 130 tons. Review our complete high-capacity spreader beam chart, starting at 5 tons.

  • Model 32

    Adjustable Spreader Beam

  • Model 34

    More stability and knock-down design means safer lifts and easier transport. Want to customize it? Pair it with the end fittings below.

  • Model 38

    This series of special spreader systems can be designed to lift loads of almost any size or weight. Certain adjustability characteristics allow for a wide range of usage, as well as handling unbalanced loads where the center of gravity is substantially off center.

  • Model 416

    Dura-Lite Model 416 is the composit version of Caldwell's Model 16 Adjustable Lifting Beam. Choose for corrosive enviroments, areas where sparks are a concern, or when a lighter beam allows you to pick a heavier load.

  • Model 419

    Dura-Lite Model 419 is the composite version of Caldwell's Model 19. Choose from 1/4- to 3-ton capacities.

  • Model 427

    This low-headroom, 4-point lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME B30.20, design category B, service class 4. Free standard UPS ground shipping on all "standard" Dura-Lite™ catalog beams up to 96" length/spread.

  • Model 430

    Get all the benefits of a Model 30 in a lighter weight beam that brings a host of advantages! Composite construction so you can use it in extreme enviroments. Lighter weight to make lifting, transporting and staging easier on operators. Lif heavier because your beam weighs less.

  • Model 50

    Put the power and control in the crane operator's skilled, capable hands with the Caldwell Motorized Rotating Crane Hook. With full 360-degree rotation, the operator can place loads in tough to reach or access locations with ease, orienting them exactly right.

  • Model 50 - PB

    Motorized Rotating Crane Hook Pin Ball

  • Model A360F

    Product Features Choose ½- or 1-ton capacityHeights under boom up to 16 ft.Spans up to 16 ft.Faster installation, no special footings required -- Place this 360° swinging jib on existing reinforced concrete that’s at least 6”DLess downtime -- Get production up and running quickly, affordably, and safelyAll designs meet AISC standards as they pertain to jibs and overhead cranes Product Options Tight Wire KitRotation StopsElectrical CollectorsParking DeviceHoist & Trolley PackagesEpoxy Anchoring Systems Product Applications Workstations and work cellsAssembly linesPick-and-place applicationsCustomizable for outdoor, food-grade, spark-proof requirements It is recommended that Foundationless Jib Cranes be mounted on reinforced concrete with a minimum depth of 6”, avoiding any gaps, cracks, or expansion joints within a given area. Size of area to be determined by qualified engineer. Anchor bolts must have a 4-_/_” minimum embedment. It is not The Caldwell Group’s responsibility to verify the suitability of a floor or structure to which our product is mounted. Prior to mounting, it is required that the customer/end user seek advice from a qualified engineer.

  • Model AL

    Single Roll Auto-Leveler

  • Model BEF

    Sometimes, you need to create it yourself. let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.

  • Model BEF-FSB

    Add these end fittings to your Model 34 to create a 4-point beam to meet your specific applications.

  • Model BEF-PC

    Sometimes, you need to create it yourself. let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.Sometimes, you need to create it yourself. let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.

  • Model DM110

    The Dura-Mod® 2-Point/110-Metric Ton Spreader Beam can be configured in spreads of 6' to 59'. Order Spreader Sections, End Fittings, Drop Links, and Bolts separately to build the beam you want.

  • Model DM170

    The Dura-Mod® 2-Point/170-Metric Ton Spreader Beam can be configured in spreads of 6' to 59'. Order Spreader Sections, End Fittings, Drop Links, and Bolts separately to build the beam you want.

  • Model DM24

    The Dura-Mod® 2-Polnt/24-Metric Ton Spreader Beam can be configured in spreads of 3' to 24'. Order Spreader Sections, End Fittings, Drop Links, and Bolts separately to build the beam you want.

  • Model DM30

    Modular DM30 Box Spreader Beam can be configured in spreads of 3' to 20' in square or rectagular configurations.

  • Model DM34

    Distributor Benefits Keep components in stock to give your customers quick-ship access to a variety of certified spreaders ... or offer as configurable rental inventoryOffer additional components (spreader sections or end/corner fittings) after initial beam system sale to help your customers expand their capabilities without breaking the bank

  • Model DM50

    The Dura-Mod® 2-Point/50 Metric Ton Spreader Beam can be configured in spreads of 3 to 41 feet.

  • Model DM60

    Modular DM60 Box Spreader Beam can be configured in spreads of 4' to 36' in square or rectagular configurations.

  • Model DM70

    The Dura-Mod® 2-Point/70-Metric Ton Spreader Beam can be configured in spreads of 3' to 45'. Order Spreader Sections, End Fittings, Drop Links, and Bolts separately to build the beam you want.

  • Model FS

    Standard Fixed Bail

  • Model HC-BEF

    Sometimes, you need to create it yourself. let Caldwell help. Choose from different end fittings and a pipe coupler to get the beam you want.

  • Model ID-Chain

    Independent Drive System Utilizing Chain Slings

  • Model LS-Dual

    Standard Dual Roller Leveler Bail

  • Model LS-Single

    Standard Single Roller Leveler Bail